Navigation
- Simple Stresses
- Strain
-
Torsion
-
Torsion
- 304 Maximum Shearing Stress and Angle of Twist of a Steel Shaft
- 305 Minimum Diameter of Steel Shaft With Allowable Angle of Twist
- 306 Maximum Shearing Stress of Marine Propeller Shaft
- 307 Power Transmitted by Solid Steel Shaft of Unknown Diameter
- 308 Maximum Horsepower That Can be Transmitted by Steel Shaft
- 309 Finding the Diameter of a Propeller Shaft Transmitting a Power
- 310 Strength Comparison of Hollow and Solid Steel Shafts of Equal Outside Diameters
- 311 Aluminum Shaft Loaded by Multiple Torques Applied at Gears
- 312 Deformation of Flexible Shaft Made From Steel Wire Encased in Stationary Tube
- 313 Maximum Torque That Can be Applied to a Hollow Steel Shaft
- 314 Maximum Shear and Relative Gear Rotation of a Compound Steel Shaft
- 315 Power Applied and Removed at Shaft Gears
- 316 Permissible Torque That Can Be Applied to a Compound Shaft
- Solution to Problem 317 Torsion
- Solution to Problem 318 Torsion
- Solution to Problem 319 Torsion
- Solution to Problem 320 Torsion
- Solution to Problem 321 Torsion
- Solution to Problem 322 Torsion
- Solution to Problem 323 Torsion
- Solution to Problem 324 Torsion
- Solution to Problem 325 Torsion
- Flanged bolt couplings
- Torsion of thin-walled tube
- Helical Springs
-
Torsion
- Shear and Moment in Beams
- Stresses in Beams
- Beam Deflections
- Restrained Beams
- Continuous Beams
- Combined Stresses
- Reinforced Beams
- Properties of Wide Flange Sections
Recent comments
- Use integration by parts for…1 week 6 days ago
- need answer1 week 6 days ago
- Yes you are absolutely right…2 weeks 2 days ago
- I think what is ask is the…2 weeks 2 days ago
- $\cos \theta = \dfrac{2}{…2 weeks 2 days ago
- Why did you use (1/SQ root 5…2 weeks 3 days ago
- How did you get the 300 000pi2 weeks 3 days ago
- It is not necessary to…2 weeks 3 days ago
- Draw a horizontal time line…3 weeks ago
- Mali po ang equation mo…4 weeks 2 days ago
Why is it "1000³"?
Why is it "1000³"?
why does it have (pi/180)
why does it have (pi/180) beside the 3 degree?