313 Maximum Torque That Can be Applied to a Hollow Steel Shaft | Strength of Materials Review at MATHalino

Problem 313
Determine the maximum torque that can be applied to a hollow circular steel shaft of 100-mm outside diameter and an 80-mm inside diameter without exceeding a shearing stress of 60 MPa or a twist of 0.5 deg/m. Use G = 83 GPa.

Solution 313

Click here to expand or collapse this section

Based on maximum allowable shearing stress:

$\tau_{max} = \dfrac{16TD}{\pi(D^4 - d^4)}$

$60 = \dfrac{16T(100)}{\pi (100^4 - 80^4)}$

$T = 6\,955 486.14 \, \text{N}\cdot\text{mm}$

$T = 6\,955.5 \, \text{N}\cdot\text{m}$

Based on maximum allowable angle of twist:

$\theta = \dfrac{TL}{JG}$

$0.5^\circ \left( \dfrac{\pi}{180^\circ} \right) = \dfrac{T(1000)}{\frac{1}{32}\pi (100^4 - 80^4)(83\,000)}$

$T = 4\,198\,282.97 \, \text{N}\cdot\text{mm}$

$T = 4\,198.28 \, \text{N}\cdot\text{m}$

Use the smaller torque, T = 4 198.28 N·m. answer

Tags

Torque

Angle of Twist

Torsional Shearing Stress

Steel Shaft

Shearing Stress

Hollow Shaft

Log in or register to post comments

fatigue01 Sun, 04/25/2021 - 15:56

Based on maximum allowable angle of twist:

where did you get the value of L?
im still confuse about the value of L being 1000

Log in or register to post comments

Jhun Vert Mon, 04/26/2021 - 10:13

The maximum allowable twist is 0.5 deg/meter, that is, 0.5 degree for every L = 1 meter length.

Log in or register to post comments

zilam (not verified) Sun, 11/13/2022 - 23:54

if u see here 0.5 degree per meter given,but we have to calculate mm unit thats why here 1000 multiplied

Log in or register to post comments

fatigue01 Mon, 04/26/2021 - 21:34

how is MPa got canceled by mm?

Log in or register to post comments

Jhun Vert Mon, 04/26/2021 - 23:58

Note: 1 MPa = 1 MN/m² = 1 N/mm².

Log in or register to post comments

Recent comments

Solution to Problem 686 | Beam Deflection by Method of Superposition
Yes.
1 month 1 week ago
Solution to Problem 686 | Beam Deflection by Method of Superposition
Sir what if we want to find…
1 month 1 week ago
Problem 513 | Friction
Hello po! Question lang po…
1 month 3 weeks ago
Solution to Problem 104 Normal Stress
400000=120[14π(D2−10000)]
(…
2 months 4 weeks ago
General Solution of $y' = x \, \ln x$
Use integration by parts for…
3 months 3 weeks ago
General Solution of $y' = x \, \ln x$
need answer
3 months 3 weeks ago
Solution to Problem 559 | Built-up Beams
Yes you are absolutely right…
3 months 4 weeks ago
Solution to Problem 559 | Built-up Beams
I think what is ask is the…
3 months 4 weeks ago
Problem 267 | Resultant of Non-Concurrent Force System
$\cos \theta = \dfrac{2}{…
3 months 4 weeks ago
Problem 267 | Resultant of Non-Concurrent Force System
Why did you use (1/SQ root 5…
3 months 4 weeks ago

Home • Forums • Blogs • Glossary • Recent
About • Contact us • Terms of Use • Privacy Policy • Hosted by Linode • Powered by Drupal

MATHalino - Engineering Mathematics • Copyright 2024 Jhun Vert • All rights reserved