MATHalinoEngineering Math ReviewProblem 543
A portion of the floor plan of a building is shown in Fig. P-543. The total loading (including live and dead loads) in each bay is as shown. Select the lightest suitable W-shape if the allowable flexural stress is 120 MPa.
$S_{required} = \dfrac{M}{f_b} = \dfrac{120(1000^2)}{120}$
$S_{required} = 1000 \times 10^3 \, \text{mm}^3$
$M_{max} = \frac{1}{8}(20)(62)$
$M_{max} = 90 \, \text{kN}\cdot\text{m}$
$S_{required} = \dfrac{M_{max}}{f_b} = \dfrac{90(1000^2)}{120}$
$S_{required} = 750 \times 10^3 \, \text{mm}^3$
$\Sigma M_{R2} = 0$
$6R_1 = 20(4) + 10(2)(5) + 15(4)(2)$
$R_1 = 50 \, \text{kN}$
$\Sigma M_{R1} = 0$
$6R_2 = 20(2) + 10(2)(1) + 15(4)(4)$
$R_2 = 50 \, \text{kN}$
For Girder (G - 1)
$S_{live-load} = \dfrac{M}{f_b} = \dfrac{40(1000^2)}{120}$
$S_{live-load} = 333.33 \times 10^3 \, \text{mm}^3$
Problem 542
Select the lightest W shape sections that can be used for the beams and girders in Illustrative Problem 537 of text book if the allowable flexural stress is 120 MPa. Neglect the weights of the members.
Problem 536
A simply supported beam 10 m long carries a uniformly distributed load of 20 kN/m over its entire length and a concentrated load of 40 kN at midspan. If the allowable stress is 120 MPa, determine the lightest W shape beam that can be used.
Problem 535
A simply supported beam 24 ft long carries a uniformly distributed load of 2000 lb/ft over its entire length and a concentrated load of 12 kips at 8 ft from left end. If the allowable stress is 18 ksi, select the lightest suitable W shape. What is the actual maximum stress in the selected beam?
Problem 534
Repeat Prob. 533 if the uniformly distributed load is changed to 5000 lb/ft.
Problem 533
A beam simply supported on a 36-ft span carries a uniformly distributed load of 2000 lb/ft over the middle 18 ft. Using an allowable stress of 20 ksi, determine the lightest suitable W shape beam. What is the actual maximum stress in the selected beam?