cantilever beam

Problem 733
The load P in Prob. 732 is replaced by a counterclockwise couple M. Determine the maximum value of M if the stress in the vertical rod is not to exceed 150 MPa.
 

Problem 732
The midpoint of the steel in Fig. P-732 is connected to the vertical aluminum rod. Determine the maximum value of P if the stress in the rod is not to exceed 120 MPa.
 

Problem 731
The beam shown in Fig. P-731 is connected to a vertical rod. If the beam is horizontal at a certain temperature, determine the increase in stress in the rod if the temperature of the rod drops 90°F. Both the beam and the rod are made of steel with E = 29 × 10⁶ psi. For the beam, use I = 154 in.⁴
 

The slope or deflection at any point on the beam is equal to the resultant of the slopes or deflections at that point caused by each of the load acting separately.
 

Problem 648
For the cantilever beam loaded as shown in Fig. P-648, determine the deflection at a distance x from the support.
 

Problem 647
Find the maximum value of EIδ for the beam shown in Fig. P-647.
 

Problem 646
For the beam shown in Fig. P-646, determine the value of I that will limit the maximum deflection to 0.50 in. Assume that E = 1.5 × 10⁶ psi.