June 2011

Problem 333
Determine the reactions R₁ and R₂ of the beam in Fig. P-333 loaded with a concentrated load of 1600 lb and a load varying from zero to an intensity of 400 lb per ft.
 

Problem 332
Determine the reactions for the beam shown in Fig. P-332.
 

Problem 329
Two cylinders A and B, weighing 100 lb and 200 lb respectively, are connected by a rigid rod curved parallel to the smooth cylindrical surface shown in Fig. P-329. Determine the angles α and β that define the position of equilibrium.
 

Problem 328
Two weightless bars pinned together as shown in Fig. P-328 support a load of 35 kN. Determine the forces P and F acting respectively along bars AB and AC that maintain equilibrium of pin A.
 

Problem 327
Forces P and F acting along the bars shown in Fig. P-327 maintain equilibrium of pin A. Determine the values of P and F.
 

Problem 326
The cylinders in Fig. P-326 have the indicated weights and dimensions. Assuming smooth contact surfaces, determine the reactions at A, B, C, and D on the cylinders.
 

Problem 325
Determine the amount and direction of the smallest force P required to start the wheel in Fig. P-325 over the block. What is the reaction at the block?
 

Problem 324
A wheel of 10-in radius carries a load of 1000 lb, as shown in Fig. P-324. (a) Determine the horizontal force P applied at the center which is necessary to start the wheel over a 5-in. block. Also find the reaction at the block. (b) If the force P may be inclined at any angle with the horizontal, determine the minimum value of P to start the wheel over the block; the angle P makes with the horizontal; and the reaction at the block.