Solution to Problem 126 Bearing Stress
Problem 126
The lap joint shown in Fig. P-126 is fastened by four ¾-in.-diameter rivets. Calculate the maximum safe load P that can be applied if the shearing stress in the rivets is limited to 14 ksi and the bearing stress in the plates is limited to 18 ksi. Assume the applied load is uniformly distributed among the four rivets.
- Read more about Solution to Problem 126 Bearing Stress
- Log in or register to post comments
Solution to Problem 125 Bearing Stress
Contents
Problem 125
In Fig. 1-12, assume that a 20-mm-diameter rivet joins the plates that are each 110 mm wide. The allowable stresses are 120 MPa for bearing in the plate material and 60 MPa for shearing of rivet. Determine (a) the minimum thickness of each plate; and (b) the largest average tensile stress in the plates.
- Read more about Solution to Problem 125 Bearing Stress
- Log in or register to post comments